Junior Mechanisms Design Engineer
3 settimane fa
The candidate will be in charge to define the project solutions concerning the mechanisms for space missions vehicles. The candidate will analyze requirements at subsystem level which will be the basis for the design definition.
The candidate will define design solutions for mechanisms, including selection of components (e.g. springs, dampers, gearbox, levers), with associated materials and processes.
Mass efficient structural solutions must be in synergy with the selected aerospace materials to be able to withstand the launch and mission loads, possible re-entry and landing impact loads.
FEM and Multibody analyses capability is required to support the identified design solutions and some detailed local model to assess the behavior of the most critical areas. The mechanisms design engineer has also to support the development process based on dedicated test articles and breadboards intended to validate the design solutions and the performed analyses and must have knowledge of CAD and drawings to drive the elaboration of the proposed design solutions. Key duties:
Design of mechanisms for manned and non-manned modules and satellites, that include:
- Spacecraft mechanical design based on aerospace materials; the following tasks are typically worked out:
- Definition and sizing of structural parts and interfaces either by hand calculation or preliminary FEM analysis
- Definition and sizing of mechanisms parts and interfaces either by hand calculation, preliminary FEM analysis and Multibody analysis
- Selection of materials and associated surface treatments
- Definition of required tolerances
- Review of CAD models and drawings
- Finite Element Modelling with use of FEMAP, Patran o Hypermesh pre and post;
- Structural static & normal mode analyses based on FEM (e.g. Nastran);
- Multibody modeling and analysis with ADAMS or Motion View/Motion Solver
- Support the development and verification plan of spacecraft mechanisms
- Reporting (Design and Analysis report, support to design and development plans, support to instrumentation plan for mechanical testing)
- Support to static, kinematic, and dynamic testing preparation, attendance and results evaluation.
- Specification/design/development/modeling of mechanism and relevant control laws (supported by MATLAB / SIMULINK or similar)
- The following skills are considered a ‘must’ for this position:
- Mechanical Engineering Knowledge;
- Basic fundamental know-how of metallic and non-metallic technologies either for material or processes;
- Basic knowledge of aerospace design and analysis methodologies and associated manuals (e.g. Bruhn, Roarks).
- Basic knowledge of tribology
- Basic knowledge of CAD and CAM processes and capabilities;
- Manufacturing drawing readings and knowledge;
- Full comprehensive capability of Windows Office package;
- Knowledge of Nastran solver
- Knowledge of a FEM pre-post processor (Hyperworks, Femap, Patran)
- Knowledge of a Multibody analysis tool (ADAMS or Motion View)
- Additional assets are competencies in using:
- Matlab, Mathcad, Simulink or equivalent;
- Master Degree in Aerospace, Aeronautical or Mechanical Engineering
- Master or specific courses in Mechanical Design will be considered additional asset
- A previous experience working in Structural or Mechanical Engineering or Industrial one for structures and mechanical systems will be considered an asset
- Languages
- Very good knowledge of English written and spoken
- French language knowledge will be considered additional asset.
-
Junior Mechanisms Design Engineer
3 settimane fa
Torino, Italia MANPOWER ITALIA A tempo pienoManpower is looking for an Aerospace Company for Junior Mechanisms Design Engineer Job Description The candidate will be in charge to define the project solutions concerning the mechanisms for space missions vehicles. The candidate will analyze requirements at subsystem level which will be the basis for the design definition. The candidate will...
-
Functional Design Engineer
1 mese fa
Torino, Italia Hitachi Vantara Corporation A tempo pienoDescription Descrizione impiego Hitachi Rail is looking for an enthusiastic self-motivated Fuctional Design Engineer who thrives in a fast-paced environment. The successful candidate is comfortable performing a wide range of tasks from administrative to strategic. The position is based in Piossasco, Italy . Who We Are Hitachi Rail is a fully...
-
Mechanisms Specialist
5 giorni fa
Torino, Italia Fompak A.S A tempo pienoPress Tab to Move to Skip to Content Link Select how often (in days) to receive an alert: Create Alert Select how often (in days) to receive an alert: To prepare a list of detail parts for new products. To contribute within the project team in the making of investment analysis of new products. To carry out part designs (metal, plastic, sponge, rubber,...
-
Electrical Engineer
4 settimane fa
Torino, Italia Arpa Consulting A tempo pienoRicerchiamo per Gruppo multinazionale settore EPC – Ingegneria ELECTRICAL ENGINEER (per potenziamento area: SENIOR, JUNIOR) L'attività sarà svolta nell'ambito dell'impiantistica elettrica: progettazionesviluppo di basic design dell'unifilare di un impiantodefinizione delle specifiche di macchinari e componenti elettricisviluppo delle descrizioni...
-
Software Design Engineer Electronics
4 settimane fa
Torino, Italia Rheinmetall Ag A tempo pienoPierburg Pump Technology Italy S.p.A. in Torino We are looking for a new Software Design Engineer KEY TASKS Development of software functions for mechatronic systems in programming language "C"Development of the basic software consisting, among other things, of real-time operating system, memory management, LIN or CAN communicationDevelopment of control...
-
Automotive Model Based Design Engineer
1 mese fa
Torino, Italia Tmc Group A tempo pienoJoin our dynamic engineering consulting firm as an Automotive Model Based Design Engineer specializing in Control Systems for Alternative Traction Vehicles (ATVs). In this role, you will play a vital part in revolutionizing the automotive industry by utilizing your expertise in model-based design to develop advanced control algorithms for Electric Vehicles...
-
R&D Design Engineer
5 giorni fa
Torino, Italia Atlas Copco Airpower N.V. A tempo pienoFunctional area: Research and Development Country: Italy City: Robassomero/TO On-Site/Remote: On-Site Company name: ABAC Aria Compressa SRL Date of Posting: May 20, 2024 Last date to apply: June 10, 2024 Our solutions are a key part of most industries - electronics, medical research, renewable energy, food production, infrastructure and many more. Working...
-
[1x] R&D Hardware Design Engineer
1 mese fa
Torino, Italia ARGOTEC S.r.l. A tempo pienoWe are looking for a passionate Hardware Design Engineer to further develop our team in the R esearch & Development Unit. In this role, you will have the chance to work on inspirational projects, contributing to the development of new technologies in support of next-generation space assets, and in the near future, you will be focused on On-Board Computers,...
-
[1X] R&D Hardware Design Engineer
1 mese fa
Torino, Italia Argotec S.R.L. A tempo pienoWe are looking for a passionate Hardware Design Engineer to further develop our team in the Research & Development Unit. In this role, you will have the chance to work on inspirational projects, contributing to the development of new technologies in support of next-generation space assets, and in the near future, you will be focused on On-Board Computers,...
-
Senior Electronic Design Engineer
2 settimane fa
Rivalta di Torino, Piemonte, Italia GE Aerospace A tempo pienoJob Description SummaryThe Electronic Design Engineer is responsible to drive the HW development in design, validation and testing of embedded electronic systems for avionics, based on mixed signals HW boards, for both full authority-based (e.g. FADEC) and hybrid electric-based propulsion control systems.He/She is also responsible of liaise with independent...
-
Thermal System Design Engineer
3 settimane fa
Rivalta di Torino, Piemonte, Italia GE Aerospace A tempo pienoJob Description SummaryAt Avio Aero, a GE Aviation Business unit, we've been reimagining the power of flight for more than 100 years. We are specialized in the design, production and maintenance of components and systems for both the civil and military aviation. Avio Aero Advanced Technology Operations is looking for a talented engineer to join our Fluid and...
-
Process&Planning Engineer Junior
2 settimane fa
Torino, Italia ManpowerGroup A tempo pienoManpower Divisione Engineering, in ottica di sviluppo di nuovi progetti presso prestigioso cliente operante nel settore metalmeccanico, ricerca: 1 Process &, Planning Engineer Junior La figura sar inserita all’interno dell'ufficio Industrial Engineering il quale è in prima linea in un piano di sviluppo aziendale pluriennale che si traduce in analisi e...
-
[1X] Embedded Linux Software Engineer
1 mese fa
Torino, Italia ARGOTEC S.r.l. A tempo pienoAt Argotec, we build the most innovative, sustainable, and reliable space solutions and missions. Our horizons range from small satellites for low Earth orbit and deep space to cutting-edge technologies designed to enhance the comfort of astronauts, space explorers, and space tourists. Our expertise leads us to design, build, and operate our own products...
-
Senior Electronic Design Engineer
2 settimane fa
Rivalta di Torino, Italia GE Aerospace A tempo pienoJob Description Summary The Electronic Design Engineer is responsible to drive the HW development in design, validation and testing of embedded electronic systems for avionics, based on mixed signals HW boards, for both full authority-based (e.g. FADEC) and hybrid electric-based propulsion control systems. He/She is also responsible of liaise with...
-
Chemical and Materials Scientist
1 mese fa
Torino, Italia newcleo A tempo pieno**Date**:26 Jun 2023 **Location**: Torino, IT **Company**:newcleo **Role Description** **Main Activities** - Alloys design for bulk and surface advanced material-based solutions. - Use of main metallurgical codes for thermodynamics, kinetics and precipitation and diffusion modelling in selected material prototypes. - Ensure the definition, follow-up and...
-
Thermal System Lead Design Engineer
2 settimane fa
Rivalta di Torino, Piemonte, Italia GE Aerospace A tempo pienoJob Description SummaryAt Avio Aero, a GE Aviation Business unit, we've been reimagining the power of flight for more than 100 years. We are specialized in the design, production and maintenance of components and systems for both the civil and military aviation.Avio Aero Advanced Technology Operations is looking for a talented engineer to join our Fluid and...
-
[1X] Small Satellite Systems Engineer
1 mese fa
Torino, Italia Argotec S.R.L. A tempo pienoTo support the growth of our company, we are looking a Small Satellite Systems Engineer. As a Systems Engineer, you will be responsible for satellite architecture, design, development and qualification of small satellites. If you put the customer at the heart of your thoughts and actions and always strive to provide a service of excellence, aspire to...
-
[2x] Hardware Design Engineer
3 settimane fa
Torino, Italia ARGOTEC S.r.l. A tempo pienoWe are looking for motivated Hardware Designer Engineers to expand one of the most active teams in Argotec, the Electronics Unit. The position will offer the chance to work on inspirational projects, contributing to the development of new technologies in support of next-generation space assets. In the near future, activities will be focused on On-Board...
-
Torino, Italia Argotec S.R.L. A tempo pienoAt Argotec, we build the most innovative, sustainable, and reliable space solutions and missions. Our horizons range from small satellites for low Earth orbit and deep space to cutting-edge technologies designed to enhance the comfort of astronauts, space explorers, and space tourists. Our expertise leads us to design, build, and operate our own products...
-
Thermal System Lead Design Engineer
2 settimane fa
Rivalta di Torino, Italia GE Aerospace A tempo pienoJob Description Summary At Avio Aero, a GE Aviation Business unit, we’ve been reimagining the power of flight for more than 100 years. We are specialized in the design, production and maintenance of components and systems for both the civil and military aviation. Avio Aero Advanced Technology Operations is looking for a talented engineer to join our...