Junior Mechanisms Design Engineer
3 settimane fa
Junior Mechanisms Design Engineer
Job Description
The candidate will be in charge to define the project solutions concerning the mechanisms for space missions vehicles. The candidate will analyze requirements at subsystem level which will be the basis for the design definition.
The candidate will define design solutions for mechanisms, including selection of components (e.g. springs, dampers, gearbox, levers), with associated materials and processes.
Mass efficient structural solutions must be in synergy with the selected aerospace materials to be able to withstand the launch and mission loads, possible re-entry and landing impact loads.
FEM and Multibody analyses capability is required to support the identified design solutions and some detailed local model to assess the behavior of the most critical areas. The mechanisms design engineer has also to support the development process based on dedicated test articles and breadboards intended to validate the design solutions and the performed analyses and must have knowledge of CAD and drawings to drive the elaboration of the proposed design solutions. Key duties:
Design of mechanisms for manned and non-manned modules and satellites, that include:
- Spacecraft mechanical design based on aerospace materials; the following tasks are typically worked out:
- Definition and sizing of structural parts and interfaces either by hand calculation or preliminary FEM analysis
- Definition and sizing of mechanisms parts and interfaces either by hand calculation, preliminary FEM analysis and Multibody analysis
- Selection of materials and associated surface treatments
- Definition of required tolerances
- Review of CAD models and drawings
- Finite Element Modelling with use of FEMAP, Patran o Hypermesh pre and post;
- Structural static & normal mode analyses based on FEM (e.g. Nastran);
- Multibody modeling and analysis with ADAMS or Motion View/Motion Solver
- Support the development and verification plan of spacecraft mechanisms
- Reporting (Design and Analysis report, support to design and development plans, support to instrumentation plan for mechanical testing)
- Support to static, kinematic, and dynamic testing preparation, attendance and results evaluation.
- Specification/design/development/modeling of mechanism and relevant control laws (supported by MATLAB / SIMULINK or similar)
Skills, experience and qualifications required:
- The following skills are considered a must for this position:
- Mechanical Engineering Knowledge;
- Basic fundamental know-how of metallic and non-metallic technologies either for material or processes;
- Basic knowledge of aerospace design and analysis methodologies and associated manuals (e.g. Bruhn, Roarks).
- Basic knowledge of tribology
- Basic knowledge of CAD and CAM processes and capabilities;
- Manufacturing drawing readings and knowledge;
- Full comprehensive capability of Windows Office package;
- Knowledge of Nastran solver
- Knowledge of a FEM pre-post processor (Hyperworks, Femap, Patran)
- Knowledge of a Multibody analysis tool (ADAMS or Motion View)
- Additional assets are competencies in using:
- Matlab, Mathcad, Simulink or equivalent;
- Master Degree in Aerospace, Aeronautical or Mechanical Engineering
- Master or specific courses in Mechanical Design will be considered additional asset
- A previous experience working in Structural or Mechanical Engineering or Industrial one for structures and mechanical systems will be considered an asset
- Languages
- Very good knowledge of English written and spoken
- French language knowledge will be considered additional asset.
Location: Torino (Italy)
We offer a permanent contract
Laurea in Ingegneria Aerospaziale by helplavoro.it
-
Junior Mechanisms Design Engineer
2 settimane fa
Turin, Italia Manpower A tempo pienoManpower is looking for an Aerospace Company forJunior Mechanisms Design Engineer Job Description The candidate will be in charge to define the project solutions concerning the mechanisms for space missions vehicles. The candidate will analyze requirements at subsystem level which will be the basis for the design definition.The candidate will define design...
-
Junior Mechanisms Design Engineer
3 giorni fa
Turin, Italia MANPOWER ITALIA A tempo pienoManpower is looking for an Aerospace Company forJunior Mechanisms Design EngineerJob Description The candidate will be in charge to define the project solutions concerning the mechanisms for space missions vehicles. The candidate will analyze requirements at subsystem level which will be the basis for the design definition. The candidate will define design...
-
Junior Analysis and Design Engineer
2 settimane fa
Turin, Italia Page Personnel A tempo pienoIl candidato, inserito all'interno dell'ufficio R&D, riporterà al team leader del gruppo di analisi fluidodinamica e simulazione di sistema, e si occuperà di ideazione, modellazione e simulazione di sistemi di iniezione per grandi motori navali.Il candidato ideale è un ingegnere meccanico (o con laurea affine) appassionato di fluidodinamica, modellazione...
-
Design Engineer
3 settimane fa
Metropolitan City of Bologna, Italia Akkodis A tempo pienoPosition description Category OPERATIONS - ENGINEERING/PRODUCTION Job title Design Engineer (Thermal Management) - Automotive Contract Permanent contract Contractual hours Full time Job description Akkodis è un leader globale nel mercato dell'ingegneria e della ricerca e sviluppo che mira ad accelerare l'innovazione...
-
Junior Materials Engineer
1 settimana fa
Turin, Italia StepsConnect A tempo pienoJob descriptionPosizione Junior Materials Engineer presso Dana Graziano. Il candidato lavorerà in un contesto globale presso l'ufficio di Rivoli (TO) in un ambiente di programmi locali e globali, strettamente con i team di rilascio e altri gruppi funzionali. Sarà responsabile del supporto all'ingegneria dei materiali per il design del prodotto, la...
-
Process&Planning Engineer Junior
1 settimana fa
Metropolitan City of Turin, Italia Manpower PINEROLO Engeneering A tempo pienoLeader nella creazione di soluzioni integrate per l incontro tra domanda e offerta di lavoro, ManpowerGroup è il partner strategico che genera un valore aggiunto per le aziende e per gli individui, aiutandoli ad entrare in contatto in base alle specifiche esigenze e competenze specialistiche. I consulenti Manpower ricercano e selezionano esclusivamente...
-
Logistics Engineer
12 ore fa
Metropolitan City of Milan, Italia Manpower MOC MILANO A tempo pienosettore gas industriali e medicaliiOfferta di lavoro per Logistics Engineer Offerta di lavoro per Junior Logistics Engineer Descrizione del ClienteSiamo alla ricerca di un Logistics Engineer per un'azienda operante nel settore dei gas industriali. Il candidato selezionato lavorerà all'interno di un contesto strutturato e dinamico, con la possibilità di...
-
Electrical Design Engineer
2 settimane fa
Turin, Italia Hays A tempo pienoIl nostro cliente è leader nello sviluppo e nella produzione di cablaggi per il settore Automotive. Stiamo selezionando una figura di Electrical Design Engineer. La risorsa si occuperà mediante Unigraphics di sviluppare il prodotto per i clienti di riferimento, dalla sua ideazione fino alla sua produzione. Si occuperà di definire e monitorare le...
-
Junior Electronic Engineer
2 settimane fa
Turin, Italia Akkodis A tempo pienoPosition description Category:OPERATIONS - ENGINEERING/PRODUCTIONJob title:Junior Electronic Engineer - Aerospace & DefenceContract:Permanent contractContractual hours:Full timeJob description Akkodis is a global leader in the engineering and research and development market that aims to accelerate innovation and digital transformation using the power of...
-
Industrial Junior Automation Engineer
4 settimane fa
Metropolitan City of Bologna, Italia Synergie Sede A tempo pienoDescrizione aziendaSynergie Italia spa Agenzia per il lavoro, divisione Permanent Bologna, cerca per importante cliente settore AutomazionePosizioneIndustrial JUNIOR Automation EngineerAttività: Avviamento e collaudo di software per macchine e impianti di automazione industriale basato su piattaforma Codesys; Partecipazione alla stesura delle specifiche...
-
Metropolitan City of Turin, Italia Manpower Torino Engineering A tempo pienoManpower is looking for an Aerospace Company in Turin for Thermal / Environmental Control & Life Support Subsystem & Equipment / Hardware Engineer Job DescriptionDesign and procurement of Active Thermal Control Section (ATCS) & Environmental Control & Life Support (ECLS) Loops, including Equipment and Piping.Key duties:Sizing of Loops based on applicable...
-
Senior Electronic Design Engineer
2 settimane fa
Turin, Italia GE Aviation A tempo pienoJob Description Summary The Electronic Design Engineer is responsible to drive the HW development in design, validation and testing of embedded electronic systems for avionics, based on mixed signals HW boards, for both full authority-based (e.g. FADEC) and hybrid electric-based propulsion control systems. He/She is also responsible of liaise with...
-
Senior Electronic Design Engineer
2 settimane fa
Turin, Italia GE Aviation A tempo pienoJob Description SummaryThe Electronic Design Engineer is responsible to drive the HW development in design, validation and testing of embedded electronic systems for avionics, based on mixed signals HW boards, for both full authority-based (e.g. FADEC) and hybrid electric-based propulsion control systems.He/She is also responsible of liaise with independent...
-
Career Day Experis @ PoliTO
1 settimana fa
Turin, Italia Experis A tempo pienoExperis , brand di ManpowerGroup presente in 54 paesi, grazie ai servizi integrati di Consulenza in ambito IT&Technology, è il Technical Partner ideale per ogni azienda che necessita di realizzare progetti in ambito Cyber Security, Business Transformation, Cloud & Infrastructure, Enterprise Applications e Digital Workspace.Lavoriamo in campo IT&Technology...
-
Maritime Works Engineer
2 mesi fa
Metropolitan City of Milan, Italia Gi Group SpA Filiale di Milano IV Novembre A tempo pienoFILIALE: MILANO OFFICEHiRevo Engineering is a business unit of Gi Group, dedicated to meeting the increasing need for specialised technical profiles in a labour market that is quickly and constantly evolving. Saipem is a global leader in the engineering and construction of major projects for the energy and infrastructure sectors, both offshore and onshore....
-
R&D Design Engineer
3 giorni fa
Turin, Italia Atlas Copco Airpower N.V. A tempo pienoFunctional area:Research and Development Country:Italy City:Robassomero/TO On-Site/Remote:On-Site Company name:ABAC Aria Compressa SRL Date of Posting:May 20, 2024 Last date to apply:June 10, 2024 Our solutions are a key part of most industries - electronics, medical research, renewable energy, food production, infrastructure and many more. Working with us...
-
[1x] R&D Hardware Design Engineer
2 settimane fa
Turin, Italia ARGOTEC S.r.l. A tempo pienoWe are looking for a passionateHardware Design Engineerto further develop our team in the R esearch & Development Unit.In this role, you will have the chance to work on inspirational projects, contributing to the development of new technologies in support of next-generation space assets, and in the near future, you will be focused on On-Board Computers,...
-
Civil & Structural Engineer
3 giorni fa
Metropolitan City of Milan, Italia NES Fircroft Lavoro a distanza Freelance A tempo pienoNES Fircroft are delighted to be partnering with a major oil and gas operator who are looking for a Civil & Structural Engineer to work on one of their key projects in Milan. The position will be on a 1 year renewable contract. The schedule will be Mon – Fri. In return the individual will be provided with an attractive rate. Job DimensionsWork in the...
-
Natural Gas Process Engineer Expert
1 mese fa
Metropolitan City of Milan, Italia Gi Group SpA Filiale di Milano IV Novembre A tempo pienoFILIALE: MILANO OFFICEHiRevo Engineering is a business unit of Gi Group, dedicated to meeting the increasing need for specialised technical profiles in a labour market that is quickly and constantly evolving.Saipem is a global leader in the engineering and construction of major projects for the energy and infrastructure sectors, both offshore and onshore....
-
Piping & Layout Engineer Expert (846129)
2 mesi fa
Metropolitan City of Milan, Italia Gi Group SpA Filiale di Milano IV Novembre A tempo pienoFILIALE: MILANO OFFICEHiRevo Engineering is a business unit of Gi Group, dedicated to meeting the increasing need for specialised technical profiles in a labour market that is quickly and constantly evolving.Saipem is a global leader in the engineering and construction of major projects for the energy and infrastructure sectors, both offshore and onshore....