Supervisory Industrial Engineer

DutiesPlan work to be accomplished, set priorities, schedule work, and make work assignments based on urgency of the workApprove/disapprove leave, and justify revisions in staffing levels, work priorities and deadlinesPlan programs to bring buildings, grounds, road, and other facilities to standardsMaintain records to reflect the status of jobs planned and in-progressRequirements Conditions of EmploymentOne year trial/probationary period may be required.Appointment may be subject to a suitability or fitness determination, as determined by a completed background investigation.this position requires you yo submit a Confidential Financial Disclosure Report (OGE450) upon entry, and annually thereafter.Male applicants born after December 31, 1959, must complete a Pre-Employment Certification Statement for Selective Service Registration.You will be required to provide proof of U.S. Citizenship.Applicants must comply with the Exceptional Family Member Program requirements as outlined in the DoD Instruction 1315.19.Must be able to satisfy the requirements of the 26JUL12 DODI 1400.25 V1230, DoD Civilian Personnel Management System: Employment in Foreign Areas and Employee Return Rights. Visit SECRET clearance is required for this positionTDY (Temporary Duty Travel) up to 10% of the timeRequired to obtain a driver's license. QualificationsWho May Apply: Only applicants who meet one of the employment authority categories below are eligible to apply for this job. You will be asked to identify which category or categories you meet, and to provide documents which prove you meet the category or categories you selected. See Proof of Eligibility for an extensive list of document requirements for all employment authorities.Current Department of Army Civilian Employees Applying to OCONUS PositionsCurrent Department of Defense (DOD) Civilian Employee (non-Army)Domestic Defense Industrial Base/Major Range and Test Facilities Base Civilian Personnel WorkforceFamily Member Preference (FMP) for Overseas EmploymentInteragency Career Transition Assistance PlanLand Management Workforce Flexibility ActMilitary Spouse Preference (MSP) for Overseas EmploymentNon-Appropriated Fund Instrumentality (NAFI)Priority Placement Program, DoD Military Reserve (MR) and National Guard (NG) Technician EligiblePriority Placement Program, DoD MR and NG Preference Eligible Tech Receiving Disability RetirementPriority Placement Program, DoD Retained Grade Preference EligibleReinstatementVeterans Employment Opportunity Act (VEOA) of 1998
In order to qualify, you must meet the education/experience requirements described below. Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community; student; social). You will receive credit for all qualifying experience, including volunteer experience. Your resume must clearly describe your relevant experience; if qualifying based on education, your transcripts will be required as part of your application. Additional information about transcripts is in this document.
Basic Requirement for Supervisory Industrial Engineer:
A. Degree: Bachelor's degree (or higher degree) in engineering. To be acceptable, the program must:
(1) lead to a bachelor's degree (or higher degree) in a school of engineering with at least one program accredited by the Accreditation Board for Engineering and Technology (ABET);
OR
(2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics.
OR
B. Combination of Education and Experience: College-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering.
The adequacy of such background must be demonstrated by one of the following:
Professional registration or licensure - Current registration as an Engineer Intern (EI), Engineer in Training (EIT), or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For example, an applicant who attains registration through a State Board's eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering positions.Written Test - Evidence of having successfully passed the Fundamentals of Engineering (FE) examination, or any other written test required for professional registration, by an engineering licensure board in the various States, the District of Columbia, Guam, or Puerto Rico.Specified academic courses - Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and that included the courses specified in A above. The courses must be fully acceptable toward meeting the requirements of an engineering program.Related curriculum - Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions.
In addition to meeting the basic requirement above, to qualify for this position you must also meet the qualification requirements listed below:
Specialized Experience: At least one year of specialized experience which includes experience in management analysis, industrial engineering, and engineering automation; developing work methods, organizational structures, management processes, and/or program administration procedures; analyzing and evaluating the effectiveness and efficiency of DPW management information systems; recommending methods to improve program effectiveness. This definition of specialized experience is typical of work performed at the next lower grade/level position in the federal service (GS-11).
You will be evaluated on the basis of your level of competency in the following areas:Ability to lead or superviseCompliance InspectionMaintenance Planning and ManagementPlanning and EvaluatingProgram/Project Management
Time in Grade Requirement: Applicants who have held a General Schedule (GS) position within the last 52 weeks must have 52 weeks of Federal service at the next lower grade or equivalent (GS-11).
EducationFOREIGN EDUCATION: If you are using education completed in foreign colleges or universities to meet the qualification requirements, you must show the education credentials have been evaluated by a private organization that specializes in interpretation of foreign education programs and such education has been deemed equivalent to that gained in an accredited U.S. education program; or full credit has been given for the courses at a U.S. accredited college or university. For further information, visit: Additional informationDirect deposit of pay is required.U.S. citizens overseas under ordinarily resident status are not eligible for appointment under the Status of Forces Agreement.Locality pay does not apply in the overseas area.If an employee brings a child to an overseas location and that child is entitled to attend a DoD school on a space-required basis in accordance with DoDEA Regulation 1342.13, the DoDEA and the Military Department responsible for providing related services will ensure that the child, if eligible for special education, receives a free appropriate public education, including related services pursuant to DoDI 1342.12 and DoDM 1342.12.If an employee brings an infant or toddler (up to 3 years of age) to an overseas location, and that infant or toddler, but for the child's age, is entitled to attend the DoDEA on a space-required basis in accordance with DoDEA Regulation 1342.13, then the Military Department responsible for EIS will provide the infant or toddler with the required EIS in accordance with the eligibility criteria consistent with DoDI 1342.12 and DoDM 1342.12.Employees (and family members) who require medical or dental care in the overseas location will be responsible for obtaining and paying for such care. Access for civilian employees and their families to military medical and dental treatment facilities is on a space-available and reimbursable basis only.Pay retention may be offered to selected applicants for positions at overseas locations. Pay retention will not be offered as an incentive for employees moving between overseas positions.Selectees may receive certain foreign area benefits such as: Living Quarters Allowance (LQA) or government quarters, home leave, etc. Selectees will have their eligibility for foreign area benefits determined at the time of hire in accordance with Department of State Standardized Regulation (DSSR) and DoDI 1400.25 volume 1250.For positions in a foreign country, that country's laws or international agreements may have a direct impact on the ability of an employee's same sex domestic partner or spouse to accompany the employee and receive certain benefits. If you believe you may be affected by these laws and agreements, you should familiarize yourself with relevant information and direct questions concerning a specific country (Foreign Duty Location) to the appropriate Army Human Resources point of contact prior to the acceptance of employment and your entrance on duty.This is CP 18 Career Field position.The initial length of this overseas tour is 36 months.When you perform a Civilian Permanent Change of Station (PCS) with the government, the Internal Revenue Service (IRS) considers the majority of your entitlements to be taxable. Visit for more information.Payment of Permanent Change of Station (PCS) costs is authorized, subject to the provisions of the Joint Travel Regulations. Help

A career with the U.S. government provides employees with a comprehensive benefits package. As a federal employee, you and your family will have access to a range of benefits that are designed to make your federal career very rewarding. Opens in a new windowLearn more about federal benefits.
Review our benefitsEligibility for benefits depends on the type of position you hold and whether your position is full-time, part-time or intermittent. Contact the hiring agency for more information on the specific benefits offered.How You Will Be EvaluatedYou will be evaluated for this job based on how well you meet the qualifications above.
Once the announcement has closed, a review of your application package (resume, supporting documents, and responses to the questionnaire) will be used to determine whether you meet the qualification requirements listed on this announcement. If you are minimally qualified, your resume and supporting documentation will be compared against your responses to the assessment questionnaire to determine your level of experience. If, after reviewing your resume and/or supporting documentation, a determination is made that you have inflated your qualifications and/or experience, you may lose consideration for this position. Please follow all instructions carefully when applying, errors or omissions may affect your eligibility.
You should list any relevant performance appraisals and incentive awards in your resume as that information may be taken into consideration during the selection process. If selected, you may be required to provide supporting documentation.
Selection is subject to restrictions resulting from Department of Defense referral system for displaced employees.
If you have retired from federal service and you are interested in employment as a reemployed annuitant, see the information in the Reemployed Annuitant information sheet.
You may claim Military Spouse preference.
You may claim Priority Placement Program (PPP) preference.
Interagency Career Transition Assistance Program (ICTAP). If you are a Federal employee in the competitive service and your agency has notified you in writing that you are a displaced employee eligible for ICTAP consideration, you may receive selection priority for this position. To receive selection priority, you must: (1) meet ICTAP eligibility criteria (2) be rated well-qualified for the position and; (3) submit the appropriate documentation to support your ICTAP eligibility. To be considered well-qualified and receive selection priority applicants must satisfy all qualification requirements for the position and receive a score of 90 or above. Additional information about the program is on OPM's Career Transition Resources website.