Process Engineering M/F

1 mese fa

Catania, Italia STMicroelectronics A tempo pieno

Job description

You will be a key contributor to SiC Technology volume ramp-up in ST. The work location will be in the new mass-production fab in Catania for the manufacturing of SiC substrate wafers, this facility will be a first of a kind in Europe for the production in volume of SiC epitaxial substrates, integrating all steps in the production flow.

Strong link is maintained with STMicroelectronics Silicon Carbide AB, located in Norrköping, Sweden, with opportunities for on-site training and collaboration. STMicroelectronics Silicon Carbide AB, previously named Norstel AB, is the ST competence center in SiC material technology: the company has been developing silicon carbide for 20 years, first at Linköping University, and since 2006 in a dedicated production facility in Norrköping.

Your main task will be to ensure a smooth transition between the R&D activities and the mass-production fab in particular with the qualification of new measurement equipment and the monitor of their behavior in production environment.

 KEY RESPONSIBILITIES

Drive the technology transfer between the R&D and the mass-production fab  Acceptance and Qualification of new metrology tools Monitor of tools performances in the production environment and perform troubleshooting on equipment faults Create new recipes and/or define the best metrology strategy to support the need of other production steps Define and perform Measurement System Analysis to ensure tool capability Process optimization to improve quality, cost, or cycle time, with a focus on measurement step

Profile

Knowledge, Skills and capabilities:

PhD or Master in scientific faculty, e.g. in Engineering, Material Science, Physics, Chemistry Experience in silicon processing and flow knowledge is a plus Precision, attention to details and good manual skills Fluent English is a must Good communication skills and able to work in a team Committed, Proactive and Curious

The Employment search is addressed to candidates of both genders, under Law 10.04.1991 n. 125, as amended by Legislative Decree n. 198/2006 which guarantees gender equality at work.

Position location

Job location

Europe, Italy, Catania

Candidate criteria

Education level required

5 - Master degree

Experience level required

2-5 years

Languages

English (3- Advanced)

Requester

Desired start date

01/07/2024

  • Sic Process Engineering

    1 settimana fa

    Catania, Italia St Microelectronics A tempo pieno

    SiC Process Engineering - Defectivity M/F General information  KEY INFORMATION: Type of contract: Regular Company department: Process Engineering At STMicroelectronics, we are 50,000+ creators and makers of semiconductor technologies. We are a global business that prides itself on diversity - 115+ nationalities and present in 35 countries.  Our...

  • SiC Process Engineering

    1 settimana fa

    Catania, Italia ST Microelectronics A tempo pieno

    SiC Process Engineering - Defectivity M/F General information KEY INFORMATION: Type of contract: Regular Company department:  Process Engineering At STMicroelectronics, we are 50,000+ creators and makers of semiconductor technologies. We are a global business that prides itself on diversity - 115+ nationalities and present in 35 countries. Our...

  • Process Engineering M/F

    1 settimana fa

    Catania, Italia St Microelectronics A tempo pieno

    Risorsa da inserire nel gruppo di ingegneria area epitassiale per caratterizzazione di processo e sviluppo nuove tecnologie Richiesta laurea magistrale in Fisica, Chimica o Ingegneria elettronica. Persona dinamica, disponibile a lavorare su turni e buona predisposizione al lavoro di team La ricerca è rivolta a candidati dell'uno e dell'altro sesso, a norma...

  • Process Engineering M/F

    1 settimana fa

    Catania, Italia St Microelectronics A tempo pieno

    Risorsa da inserire nel gruppo di ingegneria area epitassiale per caratterizzazione di processo e sviluppo nuove tecnologie Richiesta laurea magistrale in Fisica, Chimica o Ingegneria elettronica. Persona dinamica, disponibile a lavorare su turni e buona predisposizione al lavoro di team La ricerca è rivolta a candidati dell'uno e dell'altro sesso, a norma...

  • Process Engineering M/F

    4 settimane fa

    Catania, Italia ST Microelectronics A tempo pieno

    Risorsa da inserire nel gruppo di ingegneria area epitassiale per caratterizzazione di processo e sviluppo nuove tecnologie Richiesta laurea magistrale in Fisica, Chimica o Ingegneria elettronica. Persona dinamica, disponibile a lavorare su turni e buona predisposizione al lavoro di team La ricerca è rivolta a candidati dell'uno e dell'altro sesso, a norma...

  • Process Engineering M/F

    4 settimane fa

    Catania, Italia ST Microelectronics A tempo pieno

    Risorsa da inserire nel gruppo di ingegneria area epitassiale per caratterizzazione di processo e sviluppo nuove tecnologie Richiesta laurea magistrale in Fisica, Chimica o Ingegneria elettronica. Persona dinamica, disponibile a lavorare su turni e buona predisposizione al lavoro di team La ricerca è rivolta a candidati dell'uno e dell'altro...

  • Process Engineering M/F

    4 settimane fa

    Catania, Italia STMicroelectronics A tempo pieno

    Job description You will be a key contributor to SiC Technology volume ramp-up in ST. The work location will be in the new mass-production fab in Catania for the manufacturing of SiC substrate wafers, this facility will be a first of a kind in Europe for the production in volume of SiC epitaxial substrates, integrating all steps in the production...

  • Process Engineering M/F

    3 giorni fa

    Catania, Italia STMicroelectronics A tempo pieno

    Job description You will be a key contributor to SiC Technology volume ramp-up in ST. The work location will be in the new mass-production fab in Catania for the manufacturing of SiC substrate wafers, this facility will be a first of a kind in Europe for the production in volume of SiC epitaxial substrates, integrating all steps in the production flow.Strong...

  • SiC Process Engineering

    1 settimana fa

    Catania, Italia STMicroelectronics A tempo pieno

    Job description You will be a key contributor to SiC Technology volume ramp-up in ST. The work location will be in the new mass-production fab in Catania for the manufacturing of SiC substrate wafers, this facility will be a first of a kind in Europe for the production in volume of SiC epitaxial substrates, integrating all steps in the production...

  • SiC Process Engineering

    3 giorni fa

    Catania, Italia STMicroelectronics A tempo pieno

    Job description You will be a key contributor to SiC Technology volume ramp-up in ST. The work location will be in the new mass-production fab in Catania for the manufacturing of SiC substrate wafers, this facility will be a first of a kind in Europe for the production in volume of SiC epitaxial substrates, integrating all steps in the production flow.Strong...

  • Equipment Engineering M/F

    1 mese fa

    Catania, Italia STMicroelectronics A tempo pieno

    General information  KEY INFORMATION: Location:  Europe, Italy, Catania Type of contract: Regular Job open date: 11/04/2024 Company department:  Process Engineering At STMicroelectronics, we are 50,000+ creators and makers of semiconductor technologies. We are a global business that prides itself on diversity - 115+ nationalities and...

  • SiC Process Engineering

    1 mese fa

    Catania, Italia STMicroelectronics A tempo pieno

    Job description You will be a key contributor to SiC Technology volume ramp-up in ST. The work location will be in the new mass-production fab in Catania for the manufacturing of SiC substrate wafers, this facility will be a first of a kind in Europe for the production in volume of SiC epitaxial substrates, integrating all steps in the production flow....

  • Process Control Engineering

    1 settimana fa

    Catania, Italia STMicroelectronics A tempo pieno

    General Information KEY INFORMATION: Location: Europe, Italy, Catania Type of contract: Regular Job open date: 29/03/2024 Company department: Process Control Engineering At STMicroelectronics, we are 50,000+ creators and makers of semiconductor technologies. We are a global business that prides itself on diversity - 115+ nationalities and present in 35...

  • Process Engineering M/F

    2 settimane fa

    Catania, Italia Stmicroelectronics A tempo pieno

    Job descriptionYou will be a key contributor to SiC Technology volume ramp-up in ST. The work location will be in the new mass-production fab in Catania for the manufacturing of SiC substrate wafers, this facility will be a first of a kind in Europe for the production in volume of SiC epitaxial substrates, integrating all steps in the production flow.Strong...

  • Central Engineering M/F

    2 settimane fa

    Catania, Italia Stmicroelectronics A tempo pieno

    Job descriptionSupport the development and industrialization of Front End technologies in the internal fabs and external foundries. Require the needed capacity, execute the transfer and manufacturing plans to meet the production volumes, quality & cost objectives, customer-service standards as set by BUs with Operation, Quality, other Divisional Departments,...

  • Material Planning And Support Engineer M/F M/F

    2 settimane fa

    Catania, Italia St Microelectronics A tempo pieno

    Provide the basic functions of the website;Allow users to use social media features; Material Planning and Support Engineer M/F M/F General information  KEY INFORMATION: Type of contract: Regular At STMicroelectronics, we are 50,000+ creators and makers of semiconductor technologies. We are a global business that prides itself on diversity - 115+...

  • Central Engineering M/F

    2 settimane fa

    Catania, Italia STMicroelectronics A tempo pieno

    Job description Support the development and industrialization of Front End technologies in the internal fabs and external foundries. Require the needed capacity, execute the transfer and manufacturing plans to meet the production volumes, quality & cost objectives, customer-service standards as set by BUs with Operation, Quality, other Divisional...

  • Central Engineering M/F

    2 settimane fa

    Catania, Italia Stmicroelectronics A tempo pieno

    Job description Support the development and industrialization of Front End technologies in the internal fabs and external foundries. Require the needed capacity, execute the transfer and manufacturing plans to meet the production volumes, quality & cost objectives, customer-service standards as set by BUs with Operation, Quality, other Divisional...

  • Process Control Engineering

    3 giorni fa

    Catania, Italia STMicroelectronics A tempo pieno

    General Information KEY INFORMATION:Location: Europe, Italy, CataniaType of contract: RegularJob open date: 29/03/2024Company department: Process Control EngineeringAt STMicroelectronics, we are 50,000+ creators and makers of semiconductor technologies. We are a global business that prides itself on diversity - 115+ nationalities and present in 35 countries....

  • Process Control Engineering

    1 mese fa

    Catania, Italia STMicroelectronics A tempo pieno

    General information  KEY INFORMATION: Location:  Europe, Italy, Catania Type of contract: Regular Job open date: 29/03/2024 Company department:  Process Control Engineering At STMicroelectronics, we are 50,000+ creators and makers of semiconductor technologies. We are a global business that prides itself on diversity - 115+...