R&D Hardware Engineer
5 mesi fa
Job Description
The main responsibilities are:
Inside the New Product Development process or for existing product maintenance purposes, Design part of system with medium/high complexity, in particular: Design HW subsystems according to the technical specifications available, following specific guidelines and processes (selecting suitable commercial components and custom ICs, sizing their parameters properly, leveraging simulation tools, prototyping the circuits or using evaluation boards, etc.) and then measuring the behavior to refine the initial design. Define a verification plan for HW subsystems, planning also the requirements related to FW or SW necessary to perform the test. Verify the behavior of the designed subsystem against temperature, humidity, environmental stresses, etc.; verify EMC, following the specification and the product regulatory. Consolidate collected data, verify the compliance with the specification and report the achieved results during the technical review. Execute schematic entry using Company tools, and launch standard control tools; check the resulting Bill of Material. Manage the release of the HW according to the Company procedures. Share adopted design criteria and discuss them during Design reviews. In the different stages of the development of a New Product (engineering sample, Alpha, Beta, Pilot), execute all the tests listed in the Validation test suite, following the internal procedures and reporting the results
Qualifications
EDUCATION AND EXPERIENCE
Master Degree in Electronic Engineering (MA Degree) 5+ years of experience in Analog Hardware DesignKNOWLEDGE AND SKILLS
Languages: Italian and English Knowledge in using electrical CAD and simulation tools for HW design (Siemens Mentor Expedition preferred); Practical and theoretical knowledge of Analog circuit development, in particular amplifier design, stability theory, small signal and noise analysis. Good knowledge in Digital Hardware development to interface analog front end systems with microcontrollers or FPGA units. Good command of Analog parts and components selection to develop systems that satisfy specifications. Good knowledge in power supply topology and development, to achieve best performances in efficiency and miniaturization. Basic knowledge of programming technique (C or other embedded level languages) mainly to perform HW verification. Practical experience with laboratory instrumentation for PCB board and Product testing. Practical experience in EMC Troubleshooting; good capability to fix the problems with efficiency and rapidity. Enthusiasm and interest in facing new topics and technical challenges.-
R&D Hardware Design Engineer
4 settimane fa
Monte San Pietro, Emilia-Romagna, Italia Datalogic A tempo pienoJob Title: R&D Hardware Design EngineerJob Summary:We are seeking a highly skilled R&D Hardware Design Engineer to join our team at Datalogic. As a key member of our engineering team, you will be responsible for designing and developing medium to high complexity hardware subsystems for our products.Main Responsibilities:Design and develop hardware subsystems...
-
R&D Hardware Design Engineer
4 settimane fa
Monte San Pietro, Emilia-Romagna, Italia Datalogic A tempo pienoJob Title: R&D Hardware Design EngineerJob Description:The R&D Hardware Design Engineer will be responsible for designing and developing medium to high complexity hardware subsystems for our products. This includes designing HW subsystems according to technical specifications, selecting suitable commercial components and custom ICs, sizing their parameters...
-
R&D Hardware Design Engineer
3 settimane fa
Monte San Pietro, Emilia-Romagna, Italia Datalogic A tempo pienoJob Title: R&D Hardware Design EngineerJob Description:The R&D Hardware Design Engineer will be responsible for designing and developing medium to high complexity hardware subsystems within the New Product Development process or for existing product maintenance purposes.Main Responsibilities:Design HW subsystems according to technical specifications,...
-
R&D Senior Hardware Engineer
3 settimane fa
Monte San Pietro, Emilia-Romagna, Italia Datalogic A tempo pienoJob Title: R&D Senior Hardware EngineerAbout the Role:We are seeking a highly skilled R&D Senior Hardware Engineer to join our team at Datalogic. As a key member of our engineering team, you will be responsible for designing and developing mixed signal and high-speed digital electronic subsystems.Main Responsibilities:Architect, develop and design mixed...
-
R&D Senior Hardware Developer
2 settimane fa
Monte San Pietro, Emilia-Romagna, Italia Datalogic A tempo pienoJob Title: R&D Senior Hardware DeveloperJoin Datalogic as a R&D Senior Hardware DeveloperMain Responsibilities: Design and develop mixed-signal and high-speed digital electronic subsystems in compliance with technical specifications and guidelines.Develop digital board architecture, evaluating new platforms and consolidating existing ones.Develop firmware...
-
AME Hardware Test Engineer
6 mesi fa
Monte San Pietro, Italia Datalogic A tempo pienoHardware Test Engineer Datalogic is offering a AME HW Test Engineer role, reporting to the AME Manager, he / she will collaborate with the Operations Engineering area. The AME HW Test Engineer supports the Advanced Manufacturing Engineering team, a department that links R&D and Production. Key Responsabilities: Participate to New Products...
-
R&D Mechanical Engineer
4 settimane fa
Monte San Pietro, Emilia-Romagna, Italia Datalogic A tempo pienoAbout the RoleDatasensing is a high-tech company that values innovation and collaboration. We are seeking a skilled R&D Mechanical Engineer to join our team and contribute to the design, development, and testing of complex opto-mechatronic devices.Key ResponsibilitiesDesign and develop mechanical and optical components for sensors, safety, and machine vision...
-
R&D Engineer
2 settimane fa
Monte San Pietro, Emilia-Romagna, Italia Datalogic A tempo pienoJob Description:Datalogic seeks a skilled System Engineer to collaborate with the R&D area and provide engineering design and technical management for new product development projects.Main Responsibilities:Analyze stakeholders' needs and develop clear functional and performance requirements.Develop innovative system design approaches and interact with...
-
R&D Hardware Design Engineer
3 settimane fa
Monte San Pietro, Emilia-Romagna, Italia Datalogic A tempo pienoJob Title: HW Design Engineer for New ProductsThe main responsibilities of this position involve participating in the New Product Development process, contributing to the design of system components with medium to high complexity.Design HW subsystems according to technical specifications available, following specific guidelines and processes, including...
-
R&D Engineer
4 settimane fa
Sesto San Giovanni, Italia Https:Www.Energyjobline.ComSitemap.Xml A tempo pienoRuolo: R&D Engineer - AUTOMOTIVELuogo: Milano, Bergamo, Torino, Modena, Bologna, Reggio Emilia, Trento.Di cosa ti occuperai: In un'ottica di rafforzamento del team Automotive, dopo un iniziale periodo di affiancamento, ti occuperai di progetti innovativi in ambito Ricerca e Sviluppo (R&D). I principali progetti attivi sono in ambito: Sviluppo SW/FW...
-
R&D Engineer
4 settimane fa
San Possidonio, Italia https:www.energyjobline.comsitemap.xml A tempo pienoRuolo:R&D Engineer - AUTOMOTIVELuogo:Milano, Bergamo, Torino, Modena, Bologna, Reggio Emilia, Trento.Di cosa ti occuperai:In un’ottica di rafforzamento del team Automotive, dopo un iniziale periodo di affiancamento, ti occuperai di progetti innovativi in ambito Ricerca e Sviluppo (R&D). I principali progetti attivi sono in ambito:sviluppo...
-
R&D Senior Hardware Engineer
4 settimane fa
Monte San Pietro, Emilia-Romagna, Italia Datalogic A tempo pienoMain ResponsibilitiesAs a Senior Hardware Engineer at Datalogic, you will be responsible for designing and developing mixed-signal and high-speed digital electronic subsystems. This will involve architecting, developing, and designing digital board architecture, evaluating new platforms, and consolidating existing platforms. You will also be responsible for...
-
R&D Senior Hardware Engineer
5 mesi fa
Monte San Pietro, Italia Datalogic A tempo pienoJob Description MAIN RESPONSIBILITIES Inside the New Product Development process or for existing product maintenance purposes: Architect, develop and design mixed signal and high-speed digital electronic subsystems according to the technical specifications available, following specific guidelines and processes, from concept through board...
-
R&D Engineer
4 settimane fa
San Cesario sul Panaro, Italia Https:Www.Energyjobline.ComSitemap.Xml A tempo pienoRuolo: R&D Engineer - AUTOMOTIVELuogo: Milano, Bergamo, Torino, Modena, Bologna, Reggio Emilia, Trento.Di cosa ti occuperai: In un'ottica di rafforzamento del team Automotive, dopo un iniziale periodo di affiancamento, ti occuperai di progetti innovativi in ambito Ricerca e Sviluppo (R&D). I principali progetti attivi sono in ambito: Sviluppo SW/FW...
-
R&D Engineer
4 settimane fa
San Giorgio di Piano, Italia https:www.energyjobline.comsitemap.xml A tempo pienoRuolo:R&D Engineer - AUTOMOTIVELuogo:Milano, Bergamo, Torino, Modena, Bologna, Reggio Emilia, Trento.Di cosa ti occuperai:In un’ottica di rafforzamento del team Automotive, dopo un iniziale periodo di affiancamento, ti occuperai di progetti innovativi in ambito Ricerca e Sviluppo (R&D). I principali progetti attivi sono in ambito:sviluppo...
-
R&D Mechanical Engineer
4 settimane fa
Monte San Pietro, Emilia-Romagna, Italia Datalogic A tempo pienoAbout the RoleWe are seeking a highly skilled R&D Mechanical Engineer to join our team in Monte San Pietro, Italy. As a key member of our R&D community, you will be responsible for designing, developing, and testing mechanical and optical components for complex opto-mechatronic devices.Key ResponsibilitiesDesign and develop mechanical and optical components...
-
R&D Optical Engineer
1 mese fa
Monte San Pietro, Italia Datalogic A tempo pienoABOUT US Datasensing was born in 2022 from the merger between Datalogic's Sensor & Safety and Machine Vision business unit and M.D. Micro Detectors, acquired in 2021. The new company therefore faces the market with 100 years of experience, having combined two realities that have made the history of sensors in Italy since the early 1970s. ...
-
R&D Optical Engineer
4 settimane fa
Monte San Pietro, Italia Datalogic A tempo pienoABOUT US Datasensing was born in 2022 from the merger between Datalogic's Sensor & Safety and Machine Vision business unit and M.D. Micro Detectors, acquired in 2021. The new company therefore faces the market with 100 years of experience, having combined two realities that have made the history of sensors in Italy since the early 1970s. ...
-
R&D Optical Engineer
2 mesi fa
Monte San Pietro, Italia Datalogic A tempo pienoABOUT US Datasensing was born in 2022 from the merger between Datalogic's Sensor & Safety and Machine Vision business unit and M.D. Micro Detectors, acquired in 2021. The new company therefore faces the market with 100 years of experience, having combined two realities that have made the history of sensors in Italy since the early 1970s. Datasensing is...
-
R&D Mechanical Design Engineer
4 settimane fa
Monte San Pietro, Emilia-Romagna, Italia Datalogic A tempo pienoJob Title: R&D Mechanical Design EngineerAbout the Role:Datasensing is a high-tech company that believes in people and fostering a friendly and supportive work environment. As a R&D Mechanical Design Engineer, you will be responsible for designing, developing, and testing mechanical and optical components for complex opto-mechatronic devices.Key...